Home » Xiaomi » Xiaomi Redmi Note 10 USB Driver (Latest)

Xiaomi Redmi Note 10 USB Driver (Latest)

If you have owned the Xiaomi Redmi Note 10, then this article is for you. Here, you will find all the required drivers for your smartphone. In addition, you will also find the pc suite software.

Xiaomi Redmi Note 10 features 6.43 inches Super AMOLED touchscreen display. it operates on Android 11 including MIUI 12. The quad-camera setup is placed on its back with a high-quality lens. It comes with 64/128 GB of internal memory paired with 4/6 GB RAM.

Xiaomi_Redmi_Note_10 usb driver download

Drivers are very important and need to be installed before connecting your smartphone to a computer. Or, if you want to flash the firmware file and executing the ADB & fastboot commands on your device.

All these aforementioned operations require specific drivers for a particular smartphone model. All these drivers along with official PC suite software is available in this post.

Table of Contents

Download Xiaomi Redmi Note 10 USB Driver and PC Suite Software: Latest Versions

USB Drivers

Instructions To Install Drivers

  • Simply, download all the drivers on your computer.
  • Once, you are done with downloading, now extract the zip files and then run the installation process.
  • Moreover, In case of exe files, simply run the file and start the installation process.

How To Install Xiaomi Redmi Note 10 USB Drivers on Computer

Step 1: First of all, download the ADB drivers for your Xiaomi Redmi Note 10.

Step 2: After that, extract the zip file and go to the device manager.

Step 3: Now, select your PC or computer in device manager.

image

Step 4: After that, click on the “Action” tab and then click on “Add Legacy Hardware”.

Step 5: Now, proceed with “Next” until you see the below interface.

image

Step 6: Click on “Next” and you will see the interface like below. This time click on the “browse” button and go to the extracted ADB folder that you have downloaded before and then select the android_winusb file.

image

Step 7: Once, you have selected the file, then follow the on-screen instruction and proceed to install the ADB drivers on your computer.

That’s it, you have successfully installed the Xiaomi Redmi Note 10 ADB drivers on your computer.

Importance of Installing The Drivers

  • Drivers provide a software interface to the hardware components.
  • For connectivity purposes, you must install the ADB drivers on your computer.
  • Similarly, for flashing the firmware, you must install the SPD, VCOM, CDC, Qualcomm drivers according to your smartphone chipset.
  • There are different drivers for different purposes, It is recommended to download and install all the drivers provided above on your computer.
  • PC suite software or other third-party software also requires drivers.

Xiaomi Redmi Note 10 Specifications

Xiaomi_Redmi_Note_10 usb driver download

Xiaomi Redmi Note 10 was officially released on 2021, March 16.

The display of the phone features 6.43 inches Super AMOLED touchscreen, providing a resolution of 1080 x 2400 pixels. Furthermore, for screen protection, it consists of corning gorilla glass 3.

It runs on Android 11 along with MIUI 12 powered by an Octa-Core processor.

The storage includes internal memory of 64/128 GB paired with 4/6 GB RAM. Also, support micro-SD card for additional space.

As for the camera, the phone includes Quad 48MP + 8MP + 2MP + 2MP primary lens with LED flash including features. Moreover, 13 MP secondary lens is available for selfies at front.

Bluetooth, GPS, Infrared Port, WLAN, Radio, and USB are available for connectivity medium. The sensors present on the phone accelerometer, gyro, proximity, compass, and fingerprint.

It is powered by Li-Po 5000 mAh battery. Officially available in three colors Frost White, Aqua Green, and Shadow Black.

Price of Xiaomi Redmi Note 10 in dollar is about $195.

Leave a Comment