Are you searching for a Tecno Pova USB driver? Also, want to download the official pc suite software, if so, then this article is for you. Here, you will be able to download all the required drivers along with PC suite software for your smartphone.
Tecno Pova features Quad rear camera and comes with a storage capacity of 64/128 GB paired with 4/6 GB of RAM. Furthermore, It holds a punch hole display comprising of 6.8 inches screen.
Drivers are very important and need to be installed before connecting your smartphone to a computer. Or, if you want to flash the firmware file and executing the ADB & fastboot commands on your device.
All these aforementioned requires specific drivers for a particular smartphone model. All these drivers along with official PC suite software is available in this post.
Table of Contents
Download Tecno Pova USB Driver and PC Suite Software: Latest Versions
- Download (ADB) Drivers for Connecting purposes.
- Download (CDC) Drivers for flashing firmware.
- Download (VCOM) Drivers for flashing firmware.
- Download (SPD Drivers) for flashing firmware.
- Download Qualcomm USB Drivers for flashing firmware.
- Download MTP Drivers for Tecno Pova
- Download MediaTek Drivers for Tecno Pova
- Download ADB & Fastboot Setup For Tecno Pova
- Download PC Suite software For Tecno Pova
Instructions To Install Drivers
- Simply, download all the drivers on your computer.
- Once, you are done with downloading, now extract the zip files and then run the installation process.
- Moreover, In case of exe files, simply run the file and start the installation process.
How To Install Tecno Pova USB Drivers on Computer
Step 1: First of all, download the ADB drivers for your Tecno Pova.
Step 2: After that, extract the zip file and go to the device manager.
Step 3: Now, select your PC or computer in device manager.
Step 4: After that, click on the “Action” tab and then click on “Add Legacy Hardware”.
Step 5: Now, proceed with “Next” until you see the below interface.
Step 6: Click on “Next” and you will see the interface like below. This time click on the “browse” button and go to the extracted ADB folder that you have downloaded before and then select the android_winusb file.
Step 7: Once, you have selected the file, then follow the on-screen instruction and proceed to install the ADB drivers on your computer.
That’s it, you have successfully installed the Tecno Pova ADB drivers on your computer.
Tecno Pova Specifications
Tecno Pova was officially available in the market in 2020, October. The phone has got 6.8 inches IPS LCD touchscreen supporting the resolution of 720 x 1640 pixels.
Furthermore, the phone runs on Android 10 including HIOS 7.0 powered by an Octa-Core processor. The internal memory includes 64/128 GB with 4/6 GB of RAM. Also, support micro-SD card for additional storage.
The camera features Quad 13MP + 2MP + 2MP + ? primary lens with Quad-LED flash. In addition, 8MP secondary camera with Dual-LED flash is available for selfies at front.
The connectivity medium of the phone includes WLAN, Bluetooth, GPS, Radio, and USB. Moreover, the sensors includes accelerometer, proximity, compass, and fingerprint.
It is powered by Li-Po 6000 mAh battery. Officially available in three colors Dazzle Black, Speed Purple, and Magic Blue.
Price of Tecno Pova is about 110 EUR.