Are you searching for Tecno Spark 6 Go USB driver? Also, want to download the official pc suite software, if so, then this article is for you. Here, you will be able to download all the required drivers along with PC suite software for your smartphone.
Tecno Spark 6 Go is equipped with 6.52 inches IPS LCD touchscreen supporting a resolution of 720×1600 pixels. It operates on Android 10 including HIOS 6.2. Furthermore, Consists of a Dual rear camera.
Drivers are very important and need to be installed before connecting your smartphone to a computer. Or, if you want to flash the firmware file and executing the ADB & fastboot commands on your device.
All these aforementioned requires specific drivers for a particular smartphone model. All these drivers along with official PC suite software is available in this post.
Table of Contents
Download Tecno Spark 6 Go USB Driver and PC Suite Software: Latest Versions
- Download (ADB) Drivers for Connecting purposes.
- Download (CDC) Drivers for flashing firmware.
- Download (VCOM) Drivers for flashing firmware.
- Download (SPD Drivers) for flashing firmware.
- Download Qualcomm USB Drivers for flashing firmware.
- Download MTP Drivers for Tecno Spark 6 Go
- Download MediaTek Drivers for Tecno Spark 6 Go
- Download ADB & Fastboot Setup For Tecno Spark 6 Go
- Download PC Suite software For Tecno Spark 6 Go
Instructions To Install Drivers
- Simply, download all the drivers on your computer.
- Once, you are done with downloading, now extract the zip files and then run the installation process.
- Moreover, In case of exe files, simply run the file and start the installation process.
How To Install Tecno Spark 6 Go USB Drivers on Computer
Step 1: First of all, download the ADB drivers for your Tecno Spark 6 Go.
Step 2: After that, extract the zip file and go to the device manager.
Step 3: Now, select your PC or computer in device manager.
Step 4: After that, click on the “Action” tab and then click on “Add Legacy Hardware”.
Step 5: Now, proceed with “Next” until you see the below interface.
Step 6: Click on “Next” and you will see the interface like below. This time click on the “browse” button and go to the extracted ADB folder that you have downloaded before and then select the android_winusb file.
Step 7: Once, you have selected the file, then follow the on-screen instruction and proceed to install the ADB drivers on your computer.
That’s it, you have successfully installed the Tecno Spark 6 Go ADB drivers on your computer.
Tecno Spark 6 Go Specifications
Tecno Spark 6 Go made its way to the market in 2020, November. Regarding the display, the phone features 6.52 inches IPS LCD touchscreen. Moreover, providing a resolution of 720×1600 pixels.
Furthermore, It runs on Android 10 including HIOS 6.2 powered by an Octa-Core processor.
As for the storage, the phone comes in several variants 32 GB with 2/3 GB RAM and 64 GB with 2/3 GB RAM. Also, support micro-SD card for additional storage.
The camera offers Dual 13MP + ? primary lens with Dual-LED flash including features. In addition, 8MP secondary lens is available for selfies at front.
The connectivity medium of the phone includes WLAN, Bluetooth, GPS, Radio, and USB. The sensors includes accelerometer, proximity, and fingerprint.
The phone is powered by Li-Po 5000 mAh battery. It is available in three colors Aqua Blue, Mystery White, and Ice Jadelite.
Price of Tecno Spark 6 Go is about 70 EUR.