Are you searching for a Tecno Spark 7P USB driver? Also, want to download the official pc suite software, if so, then this article is for you. Here, you will be able to download all the required drivers along with PC suite software for your smartphone.
Tecno Spark 7P consists of 6.8 inches IPS LCD touchscreen supporting a resolution of 720×1640 pixels. The phone runs on Android 11 including HIOS 7.5 powered by an Octa-Core processor.
Drivers are very important and need to be installed before connecting your smartphone to a computer. Or, if you want to flash the firmware file and executing the ADB & fastboot commands on your device.
All these aforementioned requires specific drivers for a particular smartphone model. All these drivers along with official PC suite software is available in this post.
Download Tecno Spark 7P USB Driver and PC Suite Software: Latest Versions
- Download (ADB) Drivers for Connecting purposes.
- Download (CDC) Drivers for flashing firmware.
- Download (VCOM) Drivers for flashing firmware.
- Download (SPD Drivers) for flashing firmware.
- Download Qualcomm USB Drivers for flashing firmware.
- Download MTP Drivers for Tecno Spark 7P
- Download MediaTek Drivers for Tecno Spark 7P
- Download ADB & Fastboot Setup For Tecno Spark 7P
- Download PC Suite software For Tecno Spark 7P
Instructions To Install Drivers
- Simply, download all the drivers on your computer.
- Once, you are done with downloading, now extract the zip files and then run the installation process.
- Moreover, In case of exe files, simply run the file and start the installation process.
How To Install Tecno Spark 7P USB Drivers on Computer
Step 1: First of all, download the ADB drivers for your Tecno Spark 7P.
Step 2: After that, extract the zip file and go to the device manager.
Step 3: Now, select your PC or computer in device manager.
Step 4: After that, click on the “Action” tab and then click on “Add Legacy Hardware”.
Step 5: Now, proceed with “Next” until you see the below interface.
Step 6: Click on “Next” and you will see the interface like below. This time click on the “browse” button and go to the extracted ADB folder that you have downloaded before and then select the android_winusb file.
Step 7: Once, you have selected the file, then follow the on-screen instruction and proceed to install the ADB drivers on your computer.
That’s it, you have successfully installed the Tecno Spark 7P ADB drivers on your computer.
Tecno Spark 7P Specifications
Tecno Spark 7P was officially released in 2021, April. Regarding the display, the phone is equipped with 6.8 inches IPS LCD touchscreen, providing a resolution of 720×1640 pixels.
Furthermore, It runs on Android 11 including HIOS 7.5 along with an Octa-Core processor. The storage includes 64/128 GB of internal memory with 4 GB RAM. Also, support micro-SD card for additional storage.
The camera features Triple 16MP + ? + ? primary lens with Quad-LED flash. Moreover, 8MP secondary lens with dual LED flash is available for selfies at front.
The connectivity medium includes WLAN, Bluetooth, GPS, Radio, and USB. The sensors present on the phone are Accelerometer, Fingerprint, and Proximity.
It is powered by Li-Po 5000 mAh battery. Officially available in four colors Magnet Black, Summer Mojito, Spruce Green, and Alps Blue.
Price of Tecno Spark 7P is about 130 EUR.
I am an experienced Software Engineer and freelance app developer. Here at USBDriversPie, I help you find latest USB drivers for your smartphone and tablet.